-
KESSLER 1/4″ 20 TOP PLATE P/ ROTULE LOW PROFILE
– Top Plate with 1/4″-20 stud
– 3 bolts for mounting
34,81 € TTC -
KESSLER 3/8″ 16 TOP PLATE P/ ROTULE LOW PROFILE
– Top Plate with 3/8″-16 stud
– 3 bolts for mounting
34,81 € TTC -
KESSLER 6′ CAT5 EXTENSION CABLE & COUPLER KIT
This is 6′ CAT5 Extension Cable & single in-line Coupler. You can use this if you do not need the length of the 25′ CAT5 cable that comes with the ORACLE Controller.
You can also use this as a bridge between the slider motor and the slider cart/carriage when doing a 2-axis movement with the slider and the Revolution Head or Turntable.
23,20 € TTC -
KESSLER ADAPTATEUR BOL 100mm – 75mm
– 1 x 100mm – 75mm Bowl Adapter
34,81 € TTC -
KESSLER ADAPTATEUR MOTOR MOUNT P/ POCKET DOLLY
– 1 x Pocket Dolly Motor Mount
– 2 x 10/32×1/2″ Knob
– 2 x ED-109 3/4″ Thumb Screw
– 1 x Round Non-Stickered Pulley
116,20 € TTC -
KESSLER ADAPTATEUR MOUNTING KIT P/ SHUTTLE POD MINI
– Shuttle Pod Mini Motor Mount
– 2 Belt Clamp with Knobs
– 2 Motor Mount Knobs
– 2 Motor Knobs
– 12 feet of belt
234,77 € TTC -
KESSLER ADAPTATEUR SHUTTLE POD MOTOR MOUNT
– Mounting Plate
– 2 Motor Mount Knobs
– 2 Motor Knobs
– Belt Pulley
– 12 feet of Belt
– 2 Belt Clamps w/ Knobs
234,77 € TTC -
KESSLER BANDE ADHÉSIVE MÉTRÉE CS1073
Points clés
– Mesure du mouvement du chariot.
– Idéal pour CineSlider ™ 5″ standard.
– Aide à étalonner.
– Facilite la création de Time Lapse.
Poids conditionné: 1 kgs– 1x Kessler Ruban à Mesurer auto-adhesif pour CineSlider 5″.
– 1x Kessler Garantie à vie.
23,20 € TTC -
KESSLER BARRE DE DECENTREMENT PARALLAX SL
Points clés
– Mise en place et utilisation simple.
– Polyvalence.
– Possibilité de combination avec le contrôle de mouvement Kessler.
– Garantie à vie.– 1 x Kessler Crane Parallax pour longueur standard Pocket Dolly Basic v2.0/Pocket Dolly v2.0/Stealth/Philip Bloom (Carbon Compatible)
– 2 x 1/4″-20×1/2″ Flat Head Countersunk Screw
– 3 x 1/4″-20×3/4″ Flat Head Countersunk Screw
– Garantie à vie Kessler
581,20 € TTC -
KESSLER BATTERIE MAGPAK
– MagPak Battery
– AC Wall Charger
– Barrel to Barrel Connector
116,20 € TTC -
KESSLER BOL 100 BALL KIT
– 1 x 100 Ball kit
81,31 € TTC -
KESSLER BOUTON ADDITIONNEL M-10
Ce bouton additionnel Kessler M10 est fait pour fixer des têtes de trépieds fluides avec des tiges filetée métrique ou des goujons.
15,06 € TTC -
KESSLER BRAS DE TIRAGE K-POD PUSH / PULL HANDLE
Bras de tirage KESSLER K-Pod Push / Pull Handle
151,07 € TTC -
KESSLER CABESTAN SPEED DOUBLER PULLEY (2X) P/ ELEKTRADRIVE
Use this pulley in place of the standard pulley that comes with the CineSlider/Stealth/Philip Bloom motor mount kits.
With the Motor Speed Doubler Pulley installed, this will essentially double a motor’s speed, however it will reduce the motor’s torque by 50%.
For example, use this with a 500 Series Motor (516:1) and now you’re 500 Series Motor will run as if it was a 200 Series motor (which is double the speed of the 500). Note that the torque of the motor is now reduced by 50%, which means it may not be able to lift and hold as much weight.
In the past, to get a full dynamic range of motor speeds, you would have had to purchase the 50, 100, 200 and 500 series of motors. Now, with the Speed Doubler Pulley, you can purchase the 100:1 and 500:1 motor and have the same dynamic range as if you had all four motors. (Excluding the 1000:1 motor)
This Motor Speed Doubler Pulley will work with any of our elektraDRIVE Motors (50, 100, 200, 500, 1000).
Note: This is NOT compatible with the Pocket Dolly/Pocket Dolly Motor Mount/Shuttle Pod.
34,81 € TTC -
KESSLER CÂBLE ADAPTATEUR D-TAP VERS XLR
– 1 Cable
116,20 € TTC -
KESSLER CÂBLE CINEDRIVE CONTROL 2′
Connect your CineDrive Brain to a Motor Control Module or Pan/Tilt Bricks with this cable.
Available in 8″ or 5′.
For longer lengths, add on to this cable with the CineDrive Extension Control Cable
151,07 € TTC -
KESSLER CÂBLE CINEDRIVE CONTROL 5′
Connect your CineDrive Brain to a Motor Control Module or Pan/Tilt Bricks with this cable.
Available in 8″ or 5′.
For longer lengths, add on to this cable with the CineDrive Extension Control Cable
162,70 € TTC -
KESSLER CÂBLE CINEDRIVE CONTROL 8″
Connect your CineDrive Brain to a Motor Control Module or Pan/Tilt Bricks with this cable.
Available in 8″ or 5′.
For longer lengths, add on to this cable with the CineDrive Extension Control Cable
116,20 € TTC -
KESSLER CÂBLE CINEDRIVE EXTENSION DRIVE 2′
Add on to your CineDrive motor cable with this extension cable.
Available in 2′ or 5′.Connect these together for longer configurations.
151,07 € TTC -
KESSLER CABLE CINEDRIVE TRIGGER POUR RED EPIC/SCARLET
Le Câble CineDrive Trigger pour RED Epic / Scarlet se connecte depuis le port de déclenchement de l’appareil photo sur un MCB ouà la tête pan / tilt au port de synchronisation sur une caméra RED .
Une fois que le câble est connecté et « Camera Roll » est activé dans le logiciel , la caméra peut être déclenchée sur et en dehors en fonction des temps de pre-roll et post-roll spécifiées dans la section Pellicule du menu Delay.
Fonctionne également avec le bas de la puissance et de nombreuses autres fonctions définies par l’ utilisateur définies dans les caméras RED .
232,44 € TTC -
KESSLER CÂBLE DE CONTRÔLE CAMERA N3+
Câble de contrrôle caméra, compatible avec : Canon: EOS 7D/5D Series/1D Series/50D/40D/20D/20/10D
23,20 € TTC -
KESSLER CÂBLE DE CONTRÔLE CAMERA RS1
Cable compatible avec :
Panasonic: DMC-FZ50, DMC-FZ50K, DMC-FZ50S, DMC-FZ30, DMC-FZ30K, DMC-FZ30S, DMC-FZ20, DMC-FZ20K, DMC-FZ20S, LC-1, L1, DMC-GH1, DMC-GH2
Leica: DIGILUX2, DIGILUX3
23,20 € TTC -
KESSLER CÂBLE DE CONTRÔLE CAMERA S1
Câble de contrôle caméra, compatible avec :
– Sony: DSLR α900, α850, α700, α550, α500, α450, α400, α350, α300, α200, α100
– Konica Minolta: DIMAGE α200, α1, 9, 7Hi, 7i, 7, 5, 4, 3, DYNAX 7D, 5D
23,20 € TTC -
KESSLER CÂBLE E3 MC1021
Points clés
– Câble de contrôle pour controleur Oracle
– Nécessite le module de contrôle de caméra Kessler
– Compatible avec : Canon Powershot, Pentax, Samsung, Contax
– Garantie à vie KesslerCable pour contrôleur Oracle . Nécessite le module de contrôle de caméras Kessler.
Compatible avec les caméras suivantes:
Canon Powershot G10, G11, EOS 1000D, 550D (T2i), 500D (T1i), 450D, 400D, 350D, 300D, 30, 33, 50, 300, 60D
Pentax K7, K10, K20, K100, K200
Samsung GX-1L, GX-1S, GX-10, GX-20
Contax 645, N1, NX, N Digital
23,20 € TTC -
KESSLER CÂBLE SECOND SHOOTER D-TAP VERS 12V.
– 1 x Second Shooter D-Tap to 12V.
58,07 € TTC -
KESSLER CAMERA PLATFORM EXTENDER P/ POCKET JIB TRAVELER
Use the Camera Platform Extender for the Pocket Jib Traveler to easily mount larger bodied cameras to the jib.
If using a larger bodied camera without this piece, you may encounter conflict with the back of the camera and the jib arm when moving to a low jib position.
34,81 € TTC -
KESSLER CD1029 CÂBLE DE DÉCLENCHEMENT P/ RED ONE
– 1x Câble de déclenchement RED One
116,20 € TTC -
KESSLER CINEDRIVE AC POWER SUPPLY
CineDrive cables are used to extend or modify systems based on the number of axes needed. Replacement cables are also available for control cables and power cables.
CineDrive AC Power Supply (North American Wall Plug).
174,32 € TTC -
KESSLER CINEDRIVE BRAIN
– CineDrive Brain
– AC (Wall) Power Cord
1 394,95 € TTC -
KESSLER CINEDRIVE CIGARETTE ADAPTER CABLE (12VDC)
CineDrive cables are used to extend or modify systems based on the number of axes needed. Replacement cables are also available for control cables and power cables.
Use the CineDrive Cigarette Adapter Cable to connect your CineDrive Brain to a cigarette adapter style battery port.
116,20 € TTC -
KESSLER CINEDRIVE D-TAP ADAPTER CABLE
CineDrive cables are used to extend or modify systems based on the number of axes needed. Replacement cables are also available for control cables and power cables.
Use the CineDrive D-Tap Adapter Cable to connect your CineDrive Brain to a D-Tap style battery port.
116,20 € TTC